A message on the VP9 trigger from Bruce Gray.
**Please stay tuned for a word from Mr. Gray, soon**
Thanks, Rick. I'm here to announce a new GGI action package, for the VP9:
This Trijicon HD-equipped and Damon Young-stippled VP9 was subjected to our first fully developed action package for this new model. After staring blankly at it for a month (well, not really...he's been studying this thing like a teenage boy at a nudist colony), Ricky detailed every action component in his usual obsessive manner. We solved the OEM trigger bar spring bearing failure problem with a new three-strand spring and unitized bearing (which we'll market as a drop-in fix ASAP, as it's needed), he invented a trick over travel stop, and adjusted the action to yield a 4 pound 4 ounce dead-crisp pull with a wicked short and snappy reset without diminishing sear or safety engagement values. All internal action parts are finished in our proprietary electroless nickel-PTFE. Its perfect.
The only downbside is on our end: these newfangled HK striker guns are very challenging to work on technically, and very tricky to reassemble. It's not a fast job, but by Elvis the results are there, solid as can be.
We'll ask Steve from Spider Creations to put this new package up on Grayguns.com ASAP. We're still backed up, of course, but Rick's doing a better job of keeping up on his Crew's backlog than I have on the SIG side. Call him or me for a quote, with our thanks!
-Bruce
**Please stay tuned for a word from Mr. Gray, soon**
Thanks, Rick. I'm here to announce a new GGI action package, for the VP9:
This Trijicon HD-equipped and Damon Young-stippled VP9 was subjected to our first fully developed action package for this new model. After staring blankly at it for a month (well, not really...he's been studying this thing like a teenage boy at a nudist colony), Ricky detailed every action component in his usual obsessive manner. We solved the OEM trigger bar spring bearing failure problem with a new three-strand spring and unitized bearing (which we'll market as a drop-in fix ASAP, as it's needed), he invented a trick over travel stop, and adjusted the action to yield a 4 pound 4 ounce dead-crisp pull with a wicked short and snappy reset without diminishing sear or safety engagement values. All internal action parts are finished in our proprietary electroless nickel-PTFE. Its perfect.
The only downbside is on our end: these newfangled HK striker guns are very challenging to work on technically, and very tricky to reassemble. It's not a fast job, but by Elvis the results are there, solid as can be.
We'll ask Steve from Spider Creations to put this new package up on Grayguns.com ASAP. We're still backed up, of course, but Rick's doing a better job of keeping up on his Crew's backlog than I have on the SIG side. Call him or me for a quote, with our thanks!
-Bruce
