MPA DS9 Hybrid won’t leave you wanting for anything AND you have the option to add an optic. The comp on the Pit Viper isn’t going to do a whole lot of work.
https://masterpiecearms.com/shop/mpa-ds9-hybrid-black-idpa/
Just a little something to think about:
Tisas/Girsan are made in Turkey and are forged frames and slides.
Rock Island and variants are cast and made in the Philippines.
The forged parts will hold tighter tolerances for a longer time.
I have been using the ISO Tunes Caliber BT buds for a year or so. I just ordered another set to use at work. 12-13 hours per charge. The case holds another two charges in its battery. They come with different size and material inserts. Same price range as the Axils.
Bend the left leg back about 1/16”. Make the bend as low as possible. Lay the spring on it’s side and trace the shape on a piece of paper. Use that as your guide. Measure the change at the very top.
Too much bend and the hammer will start to follow the slide.
Try tightening the ejection rod. It’s a left hand thread. If it backs out, the locator pin on the rear of the cylinder won’t get pulled far enough out.
EGW ignition components are the gold standard among us action shooting guys. Hammer, sear, disconnector, sear spring, and main spring are all included in the kit.
FYI replacing the sear may require some fitting of the thumb safety or even replacement.