Ruger Recall on Mark IV Pistols.

The Best online firearms community in Louisiana.

Member Benefits:

  • Fewer Ads!
  • Discuss all aspects of firearm ownership
  • Discuss anti-gun legislation
  • Buy, sell, and trade in the classified section
  • Chat with Local gun shops, ranges, trainers & other businesses
  • Discover free outdoor shooting areas
  • View up to date on firearm-related events
  • Share photos & video with other members
  • ...and so much more!
  • JBP55

    La. CHP Instructor #409
    Premium Member
    Rating - 100%
    338   0   0
    Apr 15, 2008
    17,060
    113
    Walker
    Ruger recently discovered that all Mark IV™ pistols (including 22/45™ models) manufactured prior to June 1, 2017 have the potential to discharge unintentionally if the safety is not utilized correctly. In particular, if the trigger is pulled while the safety lever is midway between the "safe" and "fire" positions (that is, the safety is not fully engaged or fully disengaged), then the pistol may not fire when the trigger is pulled. However, if the trigger is released and the safety lever is then moved from the mid position to the "fire" position, the pistol may fire at that time.

    Overview
    Although only a small percentage of pistols appear to be affected and we are not aware of any injuries, Ruger is firmly committed to safety and would like to retrofit all potentially affected pistols with an updated safety mechanism.
    Until your Mark IV™ pistol has been retrofitted or you verify that it is not subject to the recall, we strongly recommend that you not use your pistol.
    How To Determine If Your Pistol Needs The Retrofit
    All Mark IV™ pistols produced prior to June 1, 2017 are potentially affected and therefore are being recalled. This includes Mark IV™ Target, Hunter, Competition, 22/45™, 22/45™ Lite and 22/45™ Tactical models. These models bear serial numbers beginning with "401" (2017 models) or "WBR" (2016 models).
    Firearms NOT subject to the Recall
    Newly manufactured Mark IV™ pistols will begin with serial number "500." Thus, if you have a Mark IV™ or 22/45™ pistol with a serial number beginning with the number "5," your pistol is not subject to the recall.
    Firearms That Have Been Retrofitted Already
    Mark IV™ and 22/45™ pistols retrofitted with the updated safety mechanism are easily identified by the letter "S" in the white safety dot that is visible when the safety is engaged.
     

    230gr

    Well-Known Member
    Rating - 97.6%
    40   1   0
    Feb 5, 2008
    107
    18
    Jefferson Parish
    Ruger recently discovered that all Mark IV™ pistols (including 22/45™ models) manufactured prior to June 1, 2017 have the potential to discharge unintentionally if the safety is not utilized correctly. In particular, if the trigger is pulled while the safety lever is midway between the "safe" and "fire" positions (that is, the safety is not fully engaged or fully disengaged), then the pistol may not fire when the trigger is pulled. However, if the trigger is released and the safety lever is then moved from the mid position to the "fire" position, the pistol may fire at that time.

    Overview
    Although only a small percentage of pistols appear to be affected and we are not aware of any injuries, Ruger is firmly committed to safety and would like to retrofit all potentially affected pistols with an updated safety mechanism.
    Until your Mark IV™ pistol has been retrofitted or you verify that it is not subject to the recall, we strongly recommend that you not use your pistol.
    How To Determine If Your Pistol Needs The Retrofit
    All Mark IV™ pistols produced prior to June 1, 2017 are potentially affected and therefore are being recalled. This includes Mark IV™ Target, Hunter, Competition, 22/45™, 22/45™ Lite and 22/45™ Tactical models. These models bear serial numbers beginning with "401" (2017 models) or "WBR" (2016 models).
    Firearms NOT subject to the Recall
    Newly manufactured Mark IV™ pistols will begin with serial number "500." Thus, if you have a Mark IV™ or 22/45™ pistol with a serial number beginning with the number "5," your pistol is not subject to the recall.
    Firearms That Have Been Retrofitted Already
    Mark IV™ and 22/45™ pistols retrofitted with the updated safety mechanism are easily identified by the letter "S" in the white safety dot that is visible when the safety is engaged.

    Thank you, I have 2 that need to go back for retro fit.
     

    John_

    Shooter
    Rating - 100%
    21   0   0
    Nov 23, 2013
    3,455
    113
    Hammond, LA
    More information on this, and it looks like we get a free magazine for our trouble:

    Mark IV owners should visit the Mark IV Recall website at Ruger.com/MarkIVRecall to look up the serial number of their Mark IV and verify if it is subject to the recall, sign up for the recall, and obtain additional information.

    The new parts are being built and Ruger will retrofit Mark IV pistols on a first-come, first-served basis. When Ruger is ready to retrofit a consumer's pistol, a prepaid USPS box with a shipping label and detailed packaging and shipping instructions will be sent to the consumer. The consumer should return only the grip frame assembly to Ruger. Ruger will install the updated safety mechanism, and return the grip frame assembly, free of charge. All retrofitted grip frame assemblies will be returned with a free magazine as a *thank you* for consumers' patience and cooperation. The Company will make every effort to return each pistol within one week of the day it arrives at Ruger.

    Hotlink to Ruger site for recall: https://ruger.com/dataProcess/markIVRecall/index.php?r=y
     

    homeslice

    Be honest.
    Rating - 100%
    87   0   0
    Mar 13, 2009
    1,901
    38
    St. Charles Parish
    Thanks for the heads up on this one. Mine was on the list, and is now on the list for repair. Makes sense with the ambi-safety interacting with your hand, could cause issues for sure. That's why I removed the other side of it.
     

    topgunz1

    Well-Known Member
    Gold Member
    Rating - 100%
    18   0   0
    Sep 13, 2006
    4,089
    48
    Prairieville
    Mine has to go back as well, but at least they are paying for it and giving me a free magazine. I like the gun so much it's worth it
     

    noob

    enthusiast
    Silver Member
    Rating - 100%
    41   0   0
    Mar 18, 2008
    4,284
    48
    New Orleans
    Told a customer of mine literally the day after it was posted. He said he was waiting on his box as of Thursday. He thanked me for the notice. It's a nice hunter model with the wooden finger groove grips.
     
    Top Bottom