Best conceal carry gun

**JBP55** · December 3rd, 2018, 11:22 PM

Originally Posted by Coyote5.0

This post is just like the old days James. If you wonder who I am are you still enjoying the desk?

That was a great desk and I appreciate you delivering it.

**Coyote5.0** · December 4th, 2018, 04:48 PM

Originally Posted by JBP55

That was a great desk and I appreciate you delivering it.

Glad things worked out.

**machinedrummer** · December 4th, 2018, 06:45 PM

Glock45 anything else is just....uncivilized.

**MOTOR51** · December 4th, 2018, 07:38 PM

Originally Posted by machinedrummer

Glock45 anything else is just....uncivilized.

I need an MOS G45 ASAP

Sent from my iPhone using Tapatalk Pro

**JBP55** · December 4th, 2018, 07:45 PM

Originally Posted by MOTOR51

I need an MOS G45 ASAP

Sent from my iPhone using Tapatalk Pro

I will probably wind up sending one to Primary Machine.

**RaleighReloader** · December 4th, 2018, 08:04 PM

Originally Posted by MOTOR51

Many on here forget the Glock 22 problems. We were issued the Glock 22 and found it would malfunction with an attached weapon light. Glock replaced all the frames and remedied the problem but judging by this we should have went with another company.

If I recall, that was actually a problem with the magazine spring not being strong enough to cycle the next round. The attached light would reduce the frame's ability to flex, and the physics were just right to cause stoppages with the stock magazine spring. I believe going to a stronger mag spring (+1 coil) would solve the problem.

Mike

**JBP55** · December 4th, 2018, 08:07 PM

Some LEA's had no issues once they learned not to overtighten the light. Zero Issues with one local Agency with WML on Gen 3 9mm and .40 Glocks.
More than 10 years old and still in service.

**MOTOR51** · December 4th, 2018, 08:24 PM

Originally Posted by RaleighReloader

If I recall, that was actually a problem with the magazine spring not being strong enough to cycle the next round. The attached light would reduce the frame's ability to flex, and the physics were just right to cause stoppages with the stock magazine spring. I believe going to a stronger mag spring (+1 coil) would solve the problem.

Mike

They replaced our frames.

Sent from my iPhone using Tapatalk Pro

**MOTOR51** · December 4th, 2018, 08:25 PM

Originally Posted by JBP55

Some LEA's had no issues once they learned not to overtighten the light. Zero Issues with one local Agency with WML on Gen 3 9mm and .40 Glocks.
More than 10 years old and still in service.

I knew that would get a response from you Mr James LOL

Sent from my iPhone using Tapatalk Pro