[FONT=&]KEVIN HERE WITH PARTS GALORE! VARIOUS GUN PARTS FOR SALE, CAN BE MAILED AFTER PAYPAL/VENMO PAYMENTS (no shipping cost unless specified).
LOCATED IN MANDEVILLE CAN TRAVEL A BIT BUT MAILING IS PREFERRED IF FAR ENOUGH AWAY. WILLING TO NEGOTIATE ON DEALS INVOLVING MULTIPLE PARTS.
Any questions feel free to message me or text me at 9857786227
Glock and 1911 fans will benefit mostly from these parts!!!!
Parts sold will be removed from this listing.
1) DPMS GAS BLOCK (PICATINNY TOP) AND MATCHING REMOVABLE FRONT SIGHT POST ($25/$30/$50)
DPMS gas block for sale taken off a rifle that has been shot 200 rounds before removal for a gas block with integrated front sight. Selling for $25 plus shipping. Good reliable gas block that easy to adjust and does what it needs to do. Fits standard ar15 barrel widths and was on a carbine length gun.
ALSO a gas block mounted front sight, built specifically for the gas block. Together they will run up to $50, gas block level front sight by itself will be $30 (plus ship). Attaches to picatinny rail on gas block. Sturdier than a celebrity marriage and as plain as Amish art, it can have its post replaced with various aftermarket options if desired. White stuff on sight in photo is just some loctite used when I previously installed it.
Damn good condition, just don’t need them.
2) COLT COMBAT ELITE FACTORY ROSEWOOD GRIPS ($40)[/FONT]
[FONT=&]
The original wood grips that came on my colt combat elite 1911. Government sized. 95% condition is what I’ll rate them at since they were taken off gun after shooting a few times and sat in safe. For those colt collectors who want rosewood grips that are half checkered and feature the brand COLT in its design font, these will festoon a blued full size 1911 beautifully. $40
3) GLOCK TRIGGER CONNECTOR (5.5LBS) FOR 9/40CAL ($6 plus shipping or $16 for purchase and install)
OEM Glock trigger connector for the trigger pull weight adjustments. Fired with for 200 rounds before being swapped out gun for another connector. Clean. Crisp. Consistent. Glock brand. It’ll work for ya. $6 plus shipping if shipped. ALSO CAN INSTALL FOR YOU IF WILLING TO MEET ME, FOR $10 dollars.
4)KYDEX HOLSTER FOR A GLOCK17/22 THAT HAS A STREAMLIGHT TLR1 ($65)
A kydex retention holster available for glock17/22 with mentioned light. Comes with two types of belt loops. The holster is friction lock and also turns the weapons light off for you when holstering, as the holster will turn the switch off as the gun is inserted. Can provide more photos upon request. Black coloring. One belt loop allows ease of sliding over the belt to attach, the other is traditional loops where one has to thread the loops with the belt prior to use. Both sets of loops are hard plastic. Great holster for conceal if one wears a jacket, surprisingly. $65
5)GLOCK17/22 ALL METAL REAR SIGHT ($16 plus shipping)
If beer pong is your game and plastic cups didn’t help that game and that also translates to your sight preferences well you’re in luck. Glock OEM metal rear sight, exact sight picture as the polymer factor sights but all steel construction ensures no warping from heat and use during that sick beer pong game ya got going on dropping that front sight into the solo cup for aiming. Pairs well with a fiber optic front sight, needs a tool to install on gun. $16 if you pick it up or $16 plus shipping cost. Standard height.
[/FONT]
[FONT=&]
6)COLT COMBAT FLAT MAINSPRING HOUSING ($10 plus ship), COLT DELTA ELITE ARCHED MAINSPRING HOUSING ($10 as well)
The mainspring housing for government sized 1911’s. Polymer and flat with serrations, it does what it needs to do. Surprisingly durable, exceptionally light.
The arched one is the same deal, though it is arched and offers a differing grip angle if desired. Same pricing.
[/FONT]
[FONT=&]
7)HOGUE BRAND ARCHED MAINSPRING HOUSING IN G10 OD G-MASCUS GREEN PATTERN WITH AWESOME CHECKERING ($44)
An arched mainspring housing by Hogue Inc, it is made with G10, is arched and provides a damn good grip on the back strap. If ya got any sort of green going on your gun it’ll match nicely colorwise. $44 plus shipping if you’re like, in bumfudge Alaska or any other expensive place to ship. Otherwise no shipping.
[/FONT]
[FONT=&]
8)KYDEX ACCESORY: BELT CLIP w/ HINGE ($15 for both) and KYDEX BELT LOOPS, OFFSET ($10)
Two kydex belt loops that also open up on a hinge for ease of attaching to belt. They have several areas to screw into the back of a holster or sheath and hold good purchase on MOLLE or whatever they are attached to. Weather proof and sturdy as heck. Shipping applies unless picked up.
The other loop is a standard plastic belt loop but the length is offset at an angle because let’s face it, the human body has a curve and the belt line is rounded, so the design allows the belt to follow the curve. $10 plus shipping for the pair of curve loops.
[/FONT]
LOCATED IN MANDEVILLE CAN TRAVEL A BIT BUT MAILING IS PREFERRED IF FAR ENOUGH AWAY. WILLING TO NEGOTIATE ON DEALS INVOLVING MULTIPLE PARTS.
Any questions feel free to message me or text me at 9857786227
Glock and 1911 fans will benefit mostly from these parts!!!!
Parts sold will be removed from this listing.
1) DPMS GAS BLOCK (PICATINNY TOP) AND MATCHING REMOVABLE FRONT SIGHT POST ($25/$30/$50)
DPMS gas block for sale taken off a rifle that has been shot 200 rounds before removal for a gas block with integrated front sight. Selling for $25 plus shipping. Good reliable gas block that easy to adjust and does what it needs to do. Fits standard ar15 barrel widths and was on a carbine length gun.
ALSO a gas block mounted front sight, built specifically for the gas block. Together they will run up to $50, gas block level front sight by itself will be $30 (plus ship). Attaches to picatinny rail on gas block. Sturdier than a celebrity marriage and as plain as Amish art, it can have its post replaced with various aftermarket options if desired. White stuff on sight in photo is just some loctite used when I previously installed it.
Damn good condition, just don’t need them.
2) COLT COMBAT ELITE FACTORY ROSEWOOD GRIPS ($40)[/FONT]
[FONT=&]
The original wood grips that came on my colt combat elite 1911. Government sized. 95% condition is what I’ll rate them at since they were taken off gun after shooting a few times and sat in safe. For those colt collectors who want rosewood grips that are half checkered and feature the brand COLT in its design font, these will festoon a blued full size 1911 beautifully. $40
3) GLOCK TRIGGER CONNECTOR (5.5LBS) FOR 9/40CAL ($6 plus shipping or $16 for purchase and install)
OEM Glock trigger connector for the trigger pull weight adjustments. Fired with for 200 rounds before being swapped out gun for another connector. Clean. Crisp. Consistent. Glock brand. It’ll work for ya. $6 plus shipping if shipped. ALSO CAN INSTALL FOR YOU IF WILLING TO MEET ME, FOR $10 dollars.
4)KYDEX HOLSTER FOR A GLOCK17/22 THAT HAS A STREAMLIGHT TLR1 ($65)
A kydex retention holster available for glock17/22 with mentioned light. Comes with two types of belt loops. The holster is friction lock and also turns the weapons light off for you when holstering, as the holster will turn the switch off as the gun is inserted. Can provide more photos upon request. Black coloring. One belt loop allows ease of sliding over the belt to attach, the other is traditional loops where one has to thread the loops with the belt prior to use. Both sets of loops are hard plastic. Great holster for conceal if one wears a jacket, surprisingly. $65
5)GLOCK17/22 ALL METAL REAR SIGHT ($16 plus shipping)
If beer pong is your game and plastic cups didn’t help that game and that also translates to your sight preferences well you’re in luck. Glock OEM metal rear sight, exact sight picture as the polymer factor sights but all steel construction ensures no warping from heat and use during that sick beer pong game ya got going on dropping that front sight into the solo cup for aiming. Pairs well with a fiber optic front sight, needs a tool to install on gun. $16 if you pick it up or $16 plus shipping cost. Standard height.
[/FONT]
6)COLT COMBAT FLAT MAINSPRING HOUSING ($10 plus ship), COLT DELTA ELITE ARCHED MAINSPRING HOUSING ($10 as well)
The mainspring housing for government sized 1911’s. Polymer and flat with serrations, it does what it needs to do. Surprisingly durable, exceptionally light.
The arched one is the same deal, though it is arched and offers a differing grip angle if desired. Same pricing.
[/FONT][FONT=&]
7)HOGUE BRAND ARCHED MAINSPRING HOUSING IN G10 OD G-MASCUS GREEN PATTERN WITH AWESOME CHECKERING ($44)
An arched mainspring housing by Hogue Inc, it is made with G10, is arched and provides a damn good grip on the back strap. If ya got any sort of green going on your gun it’ll match nicely colorwise. $44 plus shipping if you’re like, in bumfudge Alaska or any other expensive place to ship. Otherwise no shipping.
[/FONT]
[FONT=&]
8)KYDEX ACCESORY: BELT CLIP w/ HINGE ($15 for both) and KYDEX BELT LOOPS, OFFSET ($10)
Two kydex belt loops that also open up on a hinge for ease of attaching to belt. They have several areas to screw into the back of a holster or sheath and hold good purchase on MOLLE or whatever they are attached to. Weather proof and sturdy as heck. Shipping applies unless picked up.
The other loop is a standard plastic belt loop but the length is offset at an angle because let’s face it, the human body has a curve and the belt line is rounded, so the design allows the belt to follow the curve. $10 plus shipping for the pair of curve loops.
[/FONT]
