bayou06
Well-Known Member
[FONT=&]
We are now offering premium remanufactured once fired 300 Blackout brass. All brass is remanufactured from military brass procured from government auction. We have taken the extra care to offer you the best in this brass. We have done the following when making this brass;
[/FONT][FONT=&]• We have neck annealed all the brass prior to reforming the brass. Annealing helps brass from hard working during the resizing process. Annealing also helps extend case life.
• Brass is polished and then decapped and case necks trued.
• Brass is then trimmed, primer pockets swaged, and reformed to 300 Blackout.
• The necks are slightly belled to accept your bullets.
• Brass is then tumbled in stainless steel pins to provide a very clean and shiny finish both inside and outside the brass.
• We also offer the option to have your brass chamfered and deburred.
[/FONT]bayoubrassandammo.com• Brass is polished and then decapped and case necks trued.
• Brass is then trimmed, primer pockets swaged, and reformed to 300 Blackout.
• The necks are slightly belled to accept your bullets.
• Brass is then tumbled in stainless steel pins to provide a very clean and shiny finish both inside and outside the brass.
• We also offer the option to have your brass chamfered and deburred.
Last edited: