I was talking with a few guys lately who are in the same boat as I.
No space to really reload.
I posted a picture of the stands I made. But wanted to post on the RCBS Assy. Plate.
I had some Cabinet Grade Plywood so I cut a board out. Sanded it and put some extra stain and oil finish on it.
Mounted the plate. But also turned it 180* and put some holes so I can mount motorized case trimmer.
Today I added a hole by drilling and tapping it 3/8-20 so I could mount and dismount the Lyman 4500 Lube-Sizer.
That way I can C-Clamp the board to the desk and not damage it.
All I had on hand was some 3/8 bolts I polished the heads on.
I just wanted to give that simple plate a review. I know some do not have the money or room for a Dillon Progressive or the Space.
No space to really reload.
I posted a picture of the stands I made. But wanted to post on the RCBS Assy. Plate.
I had some Cabinet Grade Plywood so I cut a board out. Sanded it and put some extra stain and oil finish on it.
Mounted the plate. But also turned it 180* and put some holes so I can mount motorized case trimmer.
Today I added a hole by drilling and tapping it 3/8-20 so I could mount and dismount the Lyman 4500 Lube-Sizer.
That way I can C-Clamp the board to the desk and not damage it.
All I had on hand was some 3/8 bolts I polished the heads on.
I just wanted to give that simple plate a review. I know some do not have the money or room for a Dillon Progressive or the Space.
Last edited: