[FONT=&]Comes with .38 Special/.357 Magnum and 380 Auto dies.[/FONT]
[FONT=&]Product Information[/FONT]
[FONT=&]The Square DealB is only capable of loading the common straight walled pistol cartridges, uses a proprietary drop-in insert style die, and is a great compact reloader.[/FONT]
[FONT=&]4 Station Progressive Loader[/FONT]
[FONT=&]Station 1) resize/deprime[/FONT]
[FONT=&]Station 2) prime/powder drop/flare[/FONT]
[FONT=&]Station 3) seat[/FONT]
[FONT=&]Station 4) crimp[/FONT]
[FONT=&]Loads only the listed handgun cartridges. Automatic Indexing shellplate. Auto Powder / Priming Systems Uses special dies. Manually fed cases and bullets. Typical loading Rate is about 300-500 Rounds per Hour. Comes Complete With Factory Adjusted Loading Dies. Ready-to-Use, machine set up with proper primer size & shellplate installed. Machine height from bench is 18 1/2'. Lifetime 'No-B.S.' Warranty[/FONT]
[FONT=&]Machine pictured shows available options. These are not included with the base machine.[/FONT]
[FONT=&]The Basic machine includes the following:[/FONT]
[FONT=&]1 Square Deal B machine[/FONT]
[FONT=&]1 powder measure with large and small powder bars (small installed)[/FONT]
[FONT=&]Small bar throws from 2.1 to 15 grains of powder Large bar throws from 15 to 60 grains of powder[/FONT]
[FONT=&]1 priming system with large and small priming parts[/FONT]
[FONT=&]1 early warning buzzer and rod for primer system[/FONT]
[FONT=&]1 packet of tubes containing: 1 large, 1 small primer pickup tubes, 1 magazine tube, and one primer slide assembly, 1 powder measure failsafe rod assembly with bracket (DP13355)[/FONT]
[FONT=&]3 locator buttons[/FONT]
[FONT=&]1 toolhead[/FONT]
[FONT=&]1 powder die[/FONT]
[FONT=&]1 caliber conversion kit[/FONT]
[FONT=&]1 set of carbide dies (except for 44/40)[/FONT]
[FONT=&]1 Spent primer cup bracket, screws and cup[/FONT]
[FONT=&]1 loaded cartridge chute, screws and plastic bin[/FONT]
[FONT=&]Product Information[/FONT]
[FONT=&]The Square DealB is only capable of loading the common straight walled pistol cartridges, uses a proprietary drop-in insert style die, and is a great compact reloader.[/FONT]
[FONT=&]4 Station Progressive Loader[/FONT]
[FONT=&]Station 1) resize/deprime[/FONT]
[FONT=&]Station 2) prime/powder drop/flare[/FONT]
[FONT=&]Station 3) seat[/FONT]
[FONT=&]Station 4) crimp[/FONT]
[FONT=&]Loads only the listed handgun cartridges. Automatic Indexing shellplate. Auto Powder / Priming Systems Uses special dies. Manually fed cases and bullets. Typical loading Rate is about 300-500 Rounds per Hour. Comes Complete With Factory Adjusted Loading Dies. Ready-to-Use, machine set up with proper primer size & shellplate installed. Machine height from bench is 18 1/2'. Lifetime 'No-B.S.' Warranty[/FONT]
[FONT=&]Machine pictured shows available options. These are not included with the base machine.[/FONT]
[FONT=&]The Basic machine includes the following:[/FONT]
[FONT=&]1 Square Deal B machine[/FONT]
[FONT=&]1 powder measure with large and small powder bars (small installed)[/FONT]
[FONT=&]Small bar throws from 2.1 to 15 grains of powder Large bar throws from 15 to 60 grains of powder[/FONT]
[FONT=&]1 priming system with large and small priming parts[/FONT]
[FONT=&]1 early warning buzzer and rod for primer system[/FONT]
[FONT=&]1 packet of tubes containing: 1 large, 1 small primer pickup tubes, 1 magazine tube, and one primer slide assembly, 1 powder measure failsafe rod assembly with bracket (DP13355)[/FONT]
[FONT=&]3 locator buttons[/FONT]
[FONT=&]1 toolhead[/FONT]
[FONT=&]1 powder die[/FONT]
[FONT=&]1 caliber conversion kit[/FONT]
[FONT=&]1 set of carbide dies (except for 44/40)[/FONT]
[FONT=&]1 Spent primer cup bracket, screws and cup[/FONT]
[FONT=&]1 loaded cartridge chute, screws and plastic bin[/FONT]
Last edited: