Gator 45/70
Well-Known Member
I'm thinking to confuse deer?
Quarantine project thread
- Thread starter Magdump
- Start date
The Best online firearms community in Louisiana.
Member Benefits:
Fewer Ads! Discuss all aspects of firearm ownership Discuss anti-gun legislation Buy, sell, and trade in the classified section Chat with Local gun shops, ranges, trainers & other businesses Discover free outdoor shooting areas View up to date on firearm-related events Share photos & video with other members ...and so much more!
Member Benefits:
I'm thinking to confuse deer?
Bangswitch
Well-Known Member
Nice I bet. I remember this big 3.3-4 foot tall crank shaft a guy used for a mailbox post when I was a kid.
Gator 45/70
Well-Known Member
Deer can be spooky, Movement gives em ulcers.
It is for the deer that roam the neighborhood, yes neighborhood. I have 6-7 that show up each night. The string is not the best defense for them but it does cut down on them walking through the garden. I main problem with the deer is them eating the wife's rose bushes, she is pissed as the eat all of the new blooms.
......
........ Awesome!!
Let us know how that turns out. I might ask you to take some of my guns on a little boat ride.
Porch swing finally gave up. I never built a porch swing before, but I can copy paste pretty good.
So, tear this down for a pattern I reckon..
Get some cypress 1x’s
Cut all the pieces I need from the old swing pieces. I literally traced and bandsaw cut the curved pieces and just ran the rest on the table saw.
Gotta sand down all the edges too. No butt splinters for this guy.
Then pow pow pow...and a few screws..
Gotta space them right
Just gotta finish the hardware and run the chain set through it, then hang it in place of the old one.
Tomorrow when my mash is ready I got another project to start on. Hope you guys are making the most of your days off.
So, tear this down for a pattern I reckon..
Get some cypress 1x’s
Cut all the pieces I need from the old swing pieces. I literally traced and bandsaw cut the curved pieces and just ran the rest on the table saw.
Gotta sand down all the edges too. No butt splinters for this guy.
Then pow pow pow...and a few screws..
Gotta space them right
Just gotta finish the hardware and run the chain set through it, then hang it in place of the old one.
Tomorrow when my mash is ready I got another project to start on. Hope you guys are making the most of your days off.
Last edited:
Bangswitch
Well-Known Member
Porch swing finally gave up. I never built a porch swing before, but I can copy paste pretty good.
So, tear this down for a pattern I reckon..
Get some cypress 1x’s
Cut all the pieces I need from the old swing pieces. I literally traced and bandsaw cut the curved pieces and just ran the rest on the table saw.
Gotta sand down all the edges too. No butt splinters for this guy.
Then pow pow pow...and a few screws..
Gotta space them right
Just gotta finish the hardware and run the chain set through it, then hang it in place of the old one.
Tomorrow when my mash is ready I got another project to start on. Hope you guys are making the most of your days off.
nice work
Thanks man. Piece of cake. I kept the old pieces since I spent so much time denailing and cleaning them up. I’ll most likely build a couple more since it’s so cheap to turn them out compared to buying one. Me and my son spent almost an entire day doing it but I’m sure we wasted a lotta time in the process, lol.
machinedrummer
Well-Known Member
I’m building a tool shed using Hershey bars, Cheetos puffs, and pizza.
Gator 45/70
Well-Known Member
I have an old house built in 44 with ''war wood'',Needs to come down.
Full of spiffy worm,bug eaten wood,
You can see the saw blade marks and probably mostly pine although during that time even Gum trees were used for the war effort.
Free!!! One will have to assume all liability if you want it,Cause I'm broke with no insurance at all.
Full of spiffy worm,bug eaten wood,
You can see the saw blade marks and probably mostly pine although during that time even Gum trees were used for the war effort.
Free!!! One will have to assume all liability if you want it,Cause I'm broke with no insurance at all.
Attachments
Last edited:
Dang. I just gave over 30 pounds of once fired 9mm and .40 brass to a guy at work.
I worked the whole time, but did get a chance to do a few things,
Broke out all of my hk roller gun parts, organized and started ordering the small parts I needed.
Practiced bending a hk flat. Then bent 3 more and welded them up
Assembled a complete mp5 pistol for a buddy
Machined up a few fixtures
Painted a few aks
Built a ar pistol for my neighbor
Did a few gun trades
Bought a golf cart, stripped it down and painted it.
Built my wife new outdoor seating, 2 chairs and a 3 seat sofa
Cleaned the garage and got it messy again
Watched a few movies
Broke out all of my hk roller gun parts, organized and started ordering the small parts I needed.
Practiced bending a hk flat. Then bent 3 more and welded them up
Assembled a complete mp5 pistol for a buddy
Machined up a few fixtures
Painted a few aks
Built a ar pistol for my neighbor
Did a few gun trades
Bought a golf cart, stripped it down and painted it.
Built my wife new outdoor seating, 2 chairs and a 3 seat sofa
Cleaned the garage and got it messy again
Watched a few movies
I have A match available... that's all it would take!
Staff online
-
thperez1972ESSAYONS
Members online
- chips
- JR1572
- Mr_dees
- diligaf
- Tacobellgrande
- mikemule
- Brballistics
- Tonyaav
- Carrier308
- CarronJ
- martinjr123
- thperez1972
- RedClassic
- T-boy
- Bigchillin83
- Pwall
- mforsta
- Forgotten
- southerner985
- rcourv7
- dwhaley929
- tekkaman_tnt
- JL1300
- WhereIsIt?
- edman87k5
- Aurellevi
- SMR412
- stinkysix
- fng
- d.rayphelps
- hotbiggun
- Mac204
- farmerjim
- sentithot
- miscverb
- 323MAR
- jsg34
- echotrek
- kenacp
- Yankchef
- LACamper
- Fordfella
- g45
- Bowhunter1201
- mikelee
- Redd508
- neverknowsbest
- BNC3
- Vartarg
- HLM
