Chris Andersen
Member
For Sale 1911 Caspian 9mm Recon with Trijicon RMR
This is a brand new stainless steel 5" Caspian 9mm that has had the slide specially milled and modified to accept a Trijicon RMR. The RMR is mounted low enough to co witness with the Glock Supressor sights mounted on the slide. The gun has been bead blasted to give the stainless steel a “soft grey” appearance. The gun features the following:
Caspian Stainless Steel Recon Receiver
20 Lines Per inch Checkering
Flat Mainspring Housing
Tungsten Carbide Application on Rails (prevents galling)
Flat Top Slide
Glock Front Sight (easy to change out sights) (2.35 high X .90 wide)
Glock Rear Supressor Sight
Kart Gunsmith Fit Barrel Wilson/Nowlin Ramp (Fit by L&M Precision Gun Works)
EGW Thick Flange Barrel Bushing
Wilson Combat Beavertail
10-8 Performance Magazine Catch
EGW Heavy Duty Extractor
EGW Extended Ejector
Wilson Combat 9mm Bullet Proof Slide Stop
Standard Size Thumb Safety
Grider Precision Short Trigger
Nowlin Speed Demon Drop in Trigger Set
Brand New Trijicon RMR (RM02 - 8MOA) Sight
1- Tuned Springfield Metalform 9mm Magazine
The fitting of the KART Barrel and the milling of the slide and fabrication of the special adapter plate in order to mount a RMR on a 1911 was done by Mark Housel of L&M Precision. The gun runs flawlessly; is very accurate and averaged 1.37" for 10 round groups out of my machine rest.
$2,100.00 and I will pay for shipping to your FFL.
If you have any questions or are interested please email me at ceskaa@consolidated.net.
Thanks for looking - Chris
http://upload.bayoushooter.com/images/ba7atgpvyps4ai03w2zi.jpg
and
http://upload.bayoushooter.com/images/9pua9ns8tkpd2cqu3o25.jpg
This is a brand new stainless steel 5" Caspian 9mm that has had the slide specially milled and modified to accept a Trijicon RMR. The RMR is mounted low enough to co witness with the Glock Supressor sights mounted on the slide. The gun has been bead blasted to give the stainless steel a “soft grey” appearance. The gun features the following:
Caspian Stainless Steel Recon Receiver
20 Lines Per inch Checkering
Flat Mainspring Housing
Tungsten Carbide Application on Rails (prevents galling)
Flat Top Slide
Glock Front Sight (easy to change out sights) (2.35 high X .90 wide)
Glock Rear Supressor Sight
Kart Gunsmith Fit Barrel Wilson/Nowlin Ramp (Fit by L&M Precision Gun Works)
EGW Thick Flange Barrel Bushing
Wilson Combat Beavertail
10-8 Performance Magazine Catch
EGW Heavy Duty Extractor
EGW Extended Ejector
Wilson Combat 9mm Bullet Proof Slide Stop
Standard Size Thumb Safety
Grider Precision Short Trigger
Nowlin Speed Demon Drop in Trigger Set
Brand New Trijicon RMR (RM02 - 8MOA) Sight
1- Tuned Springfield Metalform 9mm Magazine
The fitting of the KART Barrel and the milling of the slide and fabrication of the special adapter plate in order to mount a RMR on a 1911 was done by Mark Housel of L&M Precision. The gun runs flawlessly; is very accurate and averaged 1.37" for 10 round groups out of my machine rest.
$2,100.00 and I will pay for shipping to your FFL.
If you have any questions or are interested please email me at ceskaa@consolidated.net.
Thanks for looking - Chris
http://upload.bayoushooter.com/images/ba7atgpvyps4ai03w2zi.jpg
and
http://upload.bayoushooter.com/images/9pua9ns8tkpd2cqu3o25.jpg
Last edited by a moderator:
