AK-47 NPAP Question....

[Jman1911]

What stock options do I have with the NPAP as the way that the stock mount is different than my past AK's that I've owned as the tang is gone.

Any help would be great! Thx!

 

[dk.easterly]

The tang isn't gone, it was never there. You need Yugo specific furniture for stocks/handguards/etc.

 

[Jman1911]

my last AK had screws on top of stock where it met the back of receiver and this one appears to have one going all the way thru stock.... Sound right? I like the magpul but when I watch the videos on them it's different from what I have.

 

[Labeeman]

Ace adaptors can help. Got to the ACE website.

 

[frankinola]

does yours have the slant cut receiver or does it have the bolt through the stock?

ace or canis for either style receiver.
if the bolt through then you can check apex gun parts for the stock, buttpad and long bolt

 

[Jman1911]

Ace adaptors can help. Got to the ACE website.

That's what I was hoping! Just didn't know which adapter.

- - - Updated - - -

does yours have the slant cut receiver or does it have the bolt through the stock?

ace or canis for either style receiver.
if the bolt through then you can check apex gun parts for the stock, buttpad and long bolt

Bolt thru stock.... Was wanting to run the ACE setup.

 

[dk.easterly]

Yes, standard Yugo furniture.

There are several adapters or straight bolt on replacements.

 

[frankinola]

here is the krebs
http://www.krebscustom.com/products/21/Krebs-Custom-Adapter-Block-for-Yugoslavian-Rifles

much better than the ace adapter

if you want to add the folder then get the storm works hinge. just go with shorter stock of you do that.
http://stormwerkz.com/stock-folding-mechanisms/stock-folding-mechanism-standard/

then add the stock you want - DPH, ace, etc

 

[dk.easterly]

Agreed on the Krebs adapter. More adjustment and better overall fit imo. I run that with the DPF Skeleton stock on an OPAP. I'll post a pic when I get home.

Seem to recall something about the NPAP needing to be filed down to fit an adapter plate. Could be wrong though.

 

[Jman1911]

Filed down to fit around rivets in rear of receiver.... Thx for pic when you get a chance!

 

[dk.easterly]

Filed down to fit around rivets in rear of receiver.... Thx for pic when you get a chance!

That's what it was.

I had some old pics saved online that I forgot about. This was how it was setup 2 years ago.

Little better photo. Forgot I ran some paracord around the stock. It gets cold against the cheek in the winter! Otherwise, it's a great shooter. I took the red dot and ultimak rail off and went back to irons.

 

[Jman1911]

Very nice! With the krebs adapter can a fixed ace be attached to it?

 

[dk.easterly]

Pretty sure. Just depends on which stock.

 

[eMGunslinger]

Not to derail the thread but you are better off selling it and buying a nicer AK, the PAP's are only one step above the CAI and IO guns but not as good as as WASR. Receivers are very soft, bolts and carriers are soft, and takes non standard parts.

Would recommend upgrading guns.

 

[dk.easterly]

Incorrect sir.

A Yugo PAP =/= OPAP =/= NPAP.

 

[Jman1911]

Not to derail the thread but you are better off selling it and buying a nicer AK, the PAP's are only one step above the CAI and IO guns but not as good as as WASR. Receivers are very soft, bolts and carriers are soft, and takes non standard parts.

Would recommend upgrading guns.

You didn't say that at the shop when I was buying it..... But should do everything I need it to do tho.

- - - Updated - - -

Incorrect sir.

A Yugo PAP =/= OPAP =/= NPAP.

What part?

 

[madppcs]

I know this thread is a couple weeks old, but magpul has a stock to fot the Yugo Npap style receivers. Here is a pic of mine with the Magpul stock

 

[NOLAGT]

http://ironwooddesigns.com/IWDHome.html if you want new wood furnature.

Was going to say pretty sure magpul has a yugo version. I just got there standard version for my c39v2. I also just sent it off to get dyed that brown orang color like wood.



i sent it off to get dyed like this but no mags

 

[Jman1911]

Those are fine!

 

[NOLAGT]

Those are fine!

Yea I'm looking forward to see it in person hope it looks as good as the pic.