Barney88PDC
SEND IT
Built by: William Roscoe (owner LA Precision Rifles)
Caliber: 6mm Creedmoor
Action: Louisiana Precision Signature Receiver (built by Defiance)
Barrel: 26" Bartlein GAP Contour threaded 5/8" x 24
Stock: KMW SENTINEL; LOP spacer system, Logger Head adjustable cheek piece
Bottom Metal: KMW
Trigger: Jewell set to 8oz.
Rings: Seekins 34mm 1.00" High
Optic: S&B 5-25x56 PM II LP CCW MIL MSR reticle.
Bipod: ATLAS with QD
Brake: JEC Custom 6mm
Coating: Cerakote Flat Black
I got the rifle and did load development based off of George Gardner’s recommendation for a starting load. The load ended up being 41.7gr of H4350 under a 105 Berger Hybrid in a Hornady 6mm Creedmoor case with a CCI BR2 primer. 10 shot string over a Magneto Speed V2 was Avg. 3064 fps, ES 18, SD 5.
I’ve only had it for 2 weeks and I took it to the Oklahoma Shoot for the Green match this past weekend and got hits at 1173 and 1300 so I’d say it’s working.
All of the following targets were shot on the same day. Only had time to shoot at each distance once so here are the results.
This is a 9 round group at 100 yards. My aim point was the 6.5mm hole I am pointing at that I shot with my .260 just prior to this.
200 Yards 2 shots just to check come up, 1" orange dot.
300 Yards 3 shots just to check come up, 1" orange dot.
500 yards 5 shots 10" Square
800 yards in BAD mirage, 10 shots. Really not a good group but I wanted to show everything not just the cherry picked ones.
24* Diamond (square on point) at the OK Match 1173 yards, First round impact.
1300 yard Elk silhouette with a 24* red square that was the target at 1300 yards. In 20 mph cross wind, it took 6 Mils of correction for wind and I got a second, third and fourth round impact.
Caliber: 6mm Creedmoor
Action: Louisiana Precision Signature Receiver (built by Defiance)
Barrel: 26" Bartlein GAP Contour threaded 5/8" x 24
Stock: KMW SENTINEL; LOP spacer system, Logger Head adjustable cheek piece
Bottom Metal: KMW
Trigger: Jewell set to 8oz.
Rings: Seekins 34mm 1.00" High
Optic: S&B 5-25x56 PM II LP CCW MIL MSR reticle.
Bipod: ATLAS with QD
Brake: JEC Custom 6mm
Coating: Cerakote Flat Black
I got the rifle and did load development based off of George Gardner’s recommendation for a starting load. The load ended up being 41.7gr of H4350 under a 105 Berger Hybrid in a Hornady 6mm Creedmoor case with a CCI BR2 primer. 10 shot string over a Magneto Speed V2 was Avg. 3064 fps, ES 18, SD 5.
I’ve only had it for 2 weeks and I took it to the Oklahoma Shoot for the Green match this past weekend and got hits at 1173 and 1300 so I’d say it’s working.
All of the following targets were shot on the same day. Only had time to shoot at each distance once so here are the results.
This is a 9 round group at 100 yards. My aim point was the 6.5mm hole I am pointing at that I shot with my .260 just prior to this.
200 Yards 2 shots just to check come up, 1" orange dot.
300 Yards 3 shots just to check come up, 1" orange dot.
500 yards 5 shots 10" Square
800 yards in BAD mirage, 10 shots. Really not a good group but I wanted to show everything not just the cherry picked ones.
24* Diamond (square on point) at the OK Match 1173 yards, First round impact.
1300 yard Elk silhouette with a 24* red square that was the target at 1300 yards. In 20 mph cross wind, it took 6 Mils of correction for wind and I got a second, third and fourth round impact.
Last edited: