10/22 trigger reassembly

[tmlowe]

Anyone have a good video showing how to reassemble the 10/22 trigger group? My little brother went to clean it after a shoot and took the trigger apart and cannot remember how to get it back together.

 

[Turn Key]

Pic's

How far apart is the trigger group ?

Can ya' post a pic on where your at with it ?

There's really not much on the Ruger trigger that's real tricky.

TK

 

[JR1572]

I have a link to detailed instructions on my computer at the house. I will post the link when I get home. It's not a video, but it's very detailed.

JR1572

 

[JR1572]

http://www.guerrillagunsmith.com/1022detailed.htm

Let me know if that helps.

JR1572

 

[tmlowe]

There's not much more to it. Just the mag release, a spring about a half inch wide by 3/4" long, and 3 pins. Uploading pic now.

One of the pics is the one that holds the mag release, another pin goes in the large hole at the very rear of the group, and the last pin is the other big one towards the front. I'm just not sure where this spring goes or how to get the pins to hold tension.

 

[Turn Key]

Here is a link for the Brownell's schematic of the 10/22 and the trigger assembly is shown here as well.

http://www.brownells.com/.aspx/pid=0/sid=55/schematicsdetail/Model_10_22_DSP

TK

 

[tmlowe]

http://www.guerrillagunsmith.com/1022detailed.htm

Let me know if that helps.

JR1572

This was perfect. The only thing actually giving me problems was the piston and mag release together. I didn't realize it went together like that. Thanks again!

 

[10shotgroup]

I use a toothpic or matchstick as a cheater pin to put it back togather.

 

[WiLieR]

Years ago I put up a pictorial on rimfirecentral about a 10/22 trigger group. I wonder if it is still there? I too use a toothpick as a cheater when disassembling/assembling the 10/22 trigger group. I have also found that a bic pen makes a good cheater when putting the safety button back in.

 

[10shotgroup]

I looked for the stickey on rimfirecentral, it's there but the pics didn't show. Don't know if it's because I'm on an iPhone. But I would have posted the link if the pics were there. I still visit rimfirecentral every day.

 

[WiLieR]

It seems I lost those pictures a few years back when I moved my hosting to a different company. It had been forever since I logged into that place. Guess I should see about taking some more pics for that thread.