9mm Missouri bullet Minimum OAL

[jimmyzshack]

I have googled this and see that many people have had adj the depth. I see there are others loading with missouri bullet's is this the same with your loads?

i'm loading 9mm 125 Grain small ball. Alliant powder says Minimum OAL is 1.12 but at that legth they will not drop in the barrel of my PF-9 or g19. i have to go down to 1.08 before they will drop in. i'm using the 4 piece lee die with the factory Crimp Die

http://www.missouribullet.com/details.php?prodId=51&category=5&secondary=8&keywords=

 

[charliepapa]

do you have a case gauge? what's the OAL if you use that?

 

[jimmyzshack]

no i don't have a case gauge.

 

[Vigilante Sniper]

Check your crimp, I've loaded them out to 1.140. My standard length on all lead 125 RN's is 1.130 and they even work in my CZ's. Set your crimp to .375 and see if the drop in better.