For sale is a hardly used Advantage Arms .22lr Glock conversion kit WITH ADDITIONAL MAGAZINE ($25 value) for Gen 1-3 Glock 17, 17L, 22, 31, 34, 35, and 37 pistols. Included are all of the original parts – slide, barrel, cleaning kit (rod, guide, brush, patch holder, patches, cleaning solution), magazine, magazine loader, AND an additional magazine (total of 2 magazines). Everything, except the spare magazine, is stored in the original factory plastic hardcase.
Glock Conversion Kits are made to work on FACTORY STOCK Glock frames. Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner's manual.
It features:
ADJUSTABLE SIGHTS
The front and rear sights are removable GLOCK style sights. The rear sight is adjustable for both windage and elevation
LAST ROUND LOCK OPEN
The slide will lock open after the last round in the magazine has been fired. Our unique patented magazine design and heat-treated steel lock open insert allows us to offer this special and desirable feature which you can only find on 'Advantage Arms' .22LR Conversion Kits for the GLOCK pistol.
INTERNAL FIRING PIN SAFETY
Glock incorporated an internal firing pin safety into their guns. We thought it was important enough to include it on our conversion kits as well. Our internal firing pin safety is designed to eliminate accidental discharges from dropping the firearm.
FINISH
All Aluminum parts are Anodized Per Mil-A-8625 with a matte black finish. All steel parts are heat treated with a Black Oxide Finish. The barrel is made from heat treated 416 Stainless Steel.
THE 10 SECOND INSTALLATION
Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner's manual. Now slide the "Advantage Arms" slide onto the frame, until it engages with the slide lock. Check to make sure that the slide lock is in its most upward position. Insert the conversion magazine. You are now ready to shoot. This procedure can be accomplished in less than 10 seconds with some practice.
These Conversion Kits are made to work on GEN 1-3 FACTORY STOCK Glock frames.
Note: Aftermarket parts such as trigger bars and connectors, especially the Ghost Connector, can adversely affect the function and reliability of your conversion kit.
According to their website, Advantage Arms highly recommends Remington "Golden Bullets" for everyday plinking and CCI MiniMags or Federal Automatch for better accuracy.
$285 firm. Will meet in New Orleans and surrounding areas.
Glock Conversion Kits are made to work on FACTORY STOCK Glock frames. Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner's manual.
It features:
ADJUSTABLE SIGHTS
The front and rear sights are removable GLOCK style sights. The rear sight is adjustable for both windage and elevation
LAST ROUND LOCK OPEN
The slide will lock open after the last round in the magazine has been fired. Our unique patented magazine design and heat-treated steel lock open insert allows us to offer this special and desirable feature which you can only find on 'Advantage Arms' .22LR Conversion Kits for the GLOCK pistol.
INTERNAL FIRING PIN SAFETY
Glock incorporated an internal firing pin safety into their guns. We thought it was important enough to include it on our conversion kits as well. Our internal firing pin safety is designed to eliminate accidental discharges from dropping the firearm.
FINISH
All Aluminum parts are Anodized Per Mil-A-8625 with a matte black finish. All steel parts are heat treated with a Black Oxide Finish. The barrel is made from heat treated 416 Stainless Steel.
THE 10 SECOND INSTALLATION
Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner's manual. Now slide the "Advantage Arms" slide onto the frame, until it engages with the slide lock. Check to make sure that the slide lock is in its most upward position. Insert the conversion magazine. You are now ready to shoot. This procedure can be accomplished in less than 10 seconds with some practice.
These Conversion Kits are made to work on GEN 1-3 FACTORY STOCK Glock frames.
Note: Aftermarket parts such as trigger bars and connectors, especially the Ghost Connector, can adversely affect the function and reliability of your conversion kit.
According to their website, Advantage Arms highly recommends Remington "Golden Bullets" for everyday plinking and CCI MiniMags or Federal Automatch for better accuracy.
$285 firm. Will meet in New Orleans and surrounding areas.
