I also load while standing. My bench is 34" high but I use the Dillon Strong Mount to elevate the press 7". So without the Strong Mount my bench would need to be 41" high. BTW, I am 5'10" tall. Adjust bench height to suit YOU!
I'm thinking a rebuild of the set up I have in the spare room. Anyone with a bench they're proud of, load a picture. Now is the time I need to see them.
This is at 41" high to provide additional storage underneath. Those plastic bins from your local hardware/lumber store fit perfectly. Feet rest on the bottom shelf.
It's tucked in the back because I only use it once every 3 months.
I anneal every firing and keep enough brass on hand to shoot 3 matches in 308 and enough to shoot 2 FPR matches with the 6x47 and 6.5x47(usually will shoot 1 in 3 matches with the 6.5mm). 3 matches worth is about all I want to put in my Thumbler's b model tumbler at one time anyway.
As for the machine, it is a Giraud. Could not be happier with it. One you get the temp and time set, load the hopper, sit back, and let it rip. They will be offering an inductive heat option in the near future on them but I'm happy with it the way it came. Benchsource is another nice machine. Has the option to run 2 torches, although I really don't think it is necessary. Down side is you have to feed it manually case by case.
Come by and visit. Bring some brass along and we will cook it.
Here is a vid I made of the Giraud because so many people had questions how it worked.
I was running it a little slow at a lower temp in this vid. The blue paint in the neck is 750 degree templaq paint. Once it reaches 750 degrees it turns clear. You only have to use it on the first few cases to set up the temp and speed of the machine.
You may decide to stand to load, later. If your bench is too low, you'll have to build a riser of some sort.
If you build it at standing height, you can buy a wooden bar stool from one of the big box stores and cut the legs to the desired height, if you really want to sit while loading.
All nice set ups, even the Lee haha. I don't think anyone should sneer at another's PERSONAL choices of equipment.
It gets the job done and you are satisfied with it load em up. Thanks for sharing.
Mine is 40" I usually stand but can sit also. Didn't ever like the strong mount so don't use it. Perfect height for bench mounted press. Cleaning and smithing area to right is also 40".
You guys scare me. They are WAY too clean. I won't even go in my room unless I have to move other stuff out of the way to get there. Otherwise it just doesn't feel right.
I just built this one. It's 41" high 3' deep and 60" long.
It's comfortable on a stool or standing. It's really heavy duty and more than some will need but I was wanting another workbench/reloading bench in addition to my store bought Husky brand work bench.
Still have plans for a bottom shelf and a couple more ideas possibly.
Mine is 37" high. I used an 8' base cabinet section the previous owners of my house left in the detached shed/garage. I changed the counter top and built the shelves and it was good to go.
The only ones who sneer are the reloading snobs, you know , the ones who drive a Lexus and look down their nose at all who don't.
A lot of us use Lee products and a lot got started with the $9.99 Lee Classic Loading tool and their $9.99 single cavity mould. It was the only way for a poor working class high school kid was able to reload.
I drive a Chevy , use Lee tools and don't look down on nobody.
Gary