G42

[kae6511]

While dry firing my Glock 42 this morning I noticed that the trigger is not resetting. I have to pull the slide back to reset the trigger. I ran 60 rounds through the gun back in June/July and it worked without a problem. Any suggestions? They gun is clean as far as basic tear down cleaning the barrel slide spring. Thanks


Sent from my iPhone using Tapatalk

 

[kae6511]

Just to clarify when I say it doesn't reset. When dry firing the trigger gets locked all the way rear until I rack the slide


Sent from my iPhone using Tapatalk

 

[Mxav]

If there isnt any live ammunition in the firearm, it wont "auto" reset.
When dry firing, you have to manually rack the slide for it to reset.

 

[BayouSlide]

Just to clarify when I say it doesn't reset. When dry firing the trigger gets locked all the way rear until I rack the slide


Sent from my iPhone using Tapatalk

Check to see whether the trigger return spring is broken: sometimes even a fairly new one will break at the first bend.

 

[US Infidel]

What Mxav said. That's how the gun works. The trigger will not reset if the slide is not cycled as when shooting; or manually cycle the slide. It sounds like your gun is working properly.

 

[alpinehyperlite]

Um........... yea..... I got nothin for ya.

 

[ta2d_cop]

It's obviously a defective gun and highly dangerous so let me take it off your hands for your own safety. I'll give you $5 for it

 

[MRBULLRED]

Sounds like you got a correct functioning Glock 42 Nugget.

 

[Dirtchevy841]

I see your a Leo and should've been around a few glocks. That is normal when dry firing. Nothing wrong with the gun.

 

[kae6511]

I'm not sure why I just don't remember my 19 doing that. Thanks guys


Sent from my iPhone using Tapatalk

 

[brand0n5o4]

glock safety