Gen 4 Glock Upgraded Parts #3 Arrived.

[JBP55]

If anyone has a Gen4 Glock without the new ejector I will need your Glock model and serial number as well as your name and a contact number if you want me to order one from Glock at no cost to you. This part is not for sale yet but Glock will ship it to a Glock Armorer. Glocks with all the upgraded parts installed started shipping mid October 2011. The upgraded parts will be installed in Walker.
If your ejector has a 5 digit number on the right side it is the latest version.
Glock will ship YOU the latest recoil spring assembly with your model and serial number.

***** If YOU WERE NOT IN THE FIRST OR SECOND GROUP AND NEED THE NEW EJECTOR POST HERE AND SEND ME A PM WITH ALL YOUR INFORMATION. ***** James

G23 Done.
G27 Done.
G27 Done.
G19 Done.
G35 Done.
G17 Done.
G17 Done.
G22 Done.
G23 Done.
G35 Done.
G19 Done.
G17 Done.

 

[JadeRaven]

Glock will ship the latest recoil spring assembly to a Glock Armorer or the owner of the pistol with the same information. New Glocks with all the upgraded parts installed started shipping October 2011.

Oooo I bought mine in September, I'll have to check it soon.

 

[JBP55]

At this time I have 7 people needing the upgraded parts for the G4 Glocks. I will contact Glock Tuesday morning 12/13/2011 and hope the parts ship before they close for Christmas. I will notify everyone when I receive the parts.

 

[JBP55]

I spoke to Glock Today about the upgraded parts for 12 G4 pistols. The department that handles the recoil spring assemblies is shipping new assemblies for 6 of the 12 pistols. I will list the last three of the serial number that will be receiving a new RSA. If your serial number is not on the list you already have the new RSA. The connectors and ejectors are handled by Warranty and I have not heard back from them yet. These Will Receive a New RSA.

G19 369 Done.
G19 458
G17 516 Done.
G17 520 Done.
G17 572 Done.
G35 127 Done.

 

[jmcrawf1]

thanks for doing this Mr James

 

[JadeRaven]

thanks for doing this Mr James

+1

 

[glockfan]

glock

Good info. Thanks

 

[cguedr]

Appreciate you looking into this for us man.

 

[JBP55]

Glock had 2 weeks of end of year inventory and time off for the holidays and should be trying to catch up on shipping this week. The parts have been "keyed in" and should be in the pipe line for shipping soon. I will notify everyone when the parts arrive. I must have the old parts to return to Glock as this could effect my ability to get warranty parts in the future.

 

[Law1911]

Is the 336 ejector the most current for a gen4 34? I've been having the occasional eratic ejection and actually had my first
Stove pipe the other day. I think the stove pipe was an isolated thing and most likely an ammo issue. I have almost 1300 rds through it so I'm not to concerned.

 

[JBP55]

Is the 336 ejector the most current for a gen4 34? I've been having the occasional eratic ejection and actually had my first
Stove pipe the other day. I think the stove pipe was an isolated thing and most likely an ammo issue. I have almost 1300 rds through it so I'm not to concerned.

No, the new one is thicker, has a slight twist to it and 5 numbers 30274.

 

[Law1911]

No, the new one is thicker, has a slight twist to it and 5 numbers 30274.

Gotcha... So Glock isn't sending armorers the updated ejectors yet?

 

[JBP55]

Gotcha... So Glock isn't sending armorers the updated ejectors yet?

Yes they are but Glock is way behind on shipping due to the two week end of year inventory and Christmas/New years holidays. The ones I ordered for this thread on 12/11/2011 are supposed to ship this week? Your department Armorer or any Glock Armorer can order the new parts with your model # and serial #. They are all in a data base and some owners are trying to get the new parts for the same pistol more than once.

 

[dfsutton]

Ok, just got a Gen 4 G19 and don't know if it has the upgrade or not. If I send you the serial # can you check?

 

[Law1911]

Ah ok.... I'll have to get with our range. It's not a dept gun so I don't know if they will order it for me or not. I just want toavoid having send the gun to Glock.

 

[JBP55]

Ah ok.... I'll have to get with our range. It's not a dept gun so I don't know if they will order it for me or not. I just want toavoid having send the gun to Glock.

I will place another order as soon as I install the parts in the 12 pistols on my current list. No reason to ship the pistol. All Glocks made after 10/10/2011 should have the new parts installed.

 

[JBP55]

The new ejectors are shorter than the old ejectors and have a slight twist. New ejector on left and top.


.

 

[Law1911]

I will place another order as soon as I install the parts in the 12 pistols on my current list. No reason to ship the pistol. All Glocks made after 10/10/2011 should have the new parts installed.

Good deal... I know mine was made before that... I think 8/11. I'm assuming the 024 is still the most current RSA?

 

[JBP55]

Good deal... I know mine was made before that... I think 8/11. I'm assuming the 024 is still the most current RSA?

You have the latest RSA, they were replaced before the ejectors and dot connectors.

 

[Law1911]

You have the latest RSA, they were replaced before the ejectors and dot connectors.

Thanks for all the help! Will you be making a post before you make your next order?