Primers & Powders

[beauxdog]

Well it finally happened, a shipment (really 2) of powder and primers has arrived. We have don't everything we wanted, just a good start. In powders, we have WST both 1 and 4 lb jugs, WSF is in 1 and 8 lb jugs, W-296 in both 1 & 8 lb jugs. We have Trail Boss, IMR-4064, IMR-4031, IMR-7625 and PowerPistol in 4 lb jugs. In Hodgons there is H-110, H4350 & H-380 and others in all the powers. For primers we have Tula small pistol and small rifle and in CCI a few for small pistol and small rifle, along with some large rifle. The Winchester line has large pistol and small pistol magnum. We also still have a good stock of Sierra bullets in both .224 and .30 cal in several weights. Come by the store at 12728 Jefferson to pickup your reloading supplies.

Thanks,

Bryan Guillory
Louisiana Gun
225-389-6077

 

[beauxdog]

To the Morning crowd.

Bryan

 

[cajun_64]

I sure could sure some H-110 but can't get to BR for a few weeks

 

[beauxdog]

Most of the primers are gone, just a few left small pistol mag and Large rifle and some .223 Tulas. We do have more primers on the way and they should be here by next week. For powders we still have some WST in the 1 and 4 lb containers, also some WSF in the 1 & 8 lb jugs. Getting very short on the 4 lb Power Pistol jugs. Still have a fai selection of rifle powders in stock. More on the way just not sure when they will show up.

Thanks,

Bryan Guillory
Louisiana Gun
225-389-6077

 

[bayougump]

If you get any titegroup in I will make the ride to "Red Stick"

 

[jgreco15]

Any chance you will get some CCI BR-2 LG rifle primers?

 

[beauxdog]

No Joy on the BR-2. Lucky to get what we have. None of the suppliers have any of the Benchrest primers in inventory. Hope we can get some in the near future but for now there isn't any that we have found.

Thanks,

Bryan

 

[jackabob2001]

Any status on when more powder might be coming in? Looking for H4350 or H4831sc.

 

[beauxdog]

Waiting on 2 orders to arrive. Made another order this week but it won't be here for at least 4 weeks. Working on some new suppliers. Bryan