(Slidell Mandeville area)Need 50grains of Winchester AutoComp

[The_Shadow]

This is sort of strange request, but I am wanting to test a couple of loads using Winchester AutoComp, I only need about 50 grains of of powder to perform the testing. If someone can spare a small sample of AutoComp, it's only about 25 cents worth of powder but would pay $1 so I can do this project.
I can meet in the area around Slidell/Mandeville...I'll bring a digital scale photo film can to put the powder in, to make it easy.
PM me if you are willing to help me out, and work out the details to meet up.
Thanks for helping out if you can,
Wade

 

[The_Shadow]

Maybe there is a powder I have, that you may want to test with as a trade?

 

[Bayou52]

This is sort of strange request, but I am wanting to test a couple of loads using Winchester AutoComp, I only need about 50 grains of of powder to perform the testing. If someone can spare a small sample of AutoComp, it's only about 25 cents worth of powder but would pay $1 so I can do this project.
I can meet in the area around Slidell/Mandeville...I'll bring a digital scale photo film can to put the powder in, to make it easy.
PM me if you are willing to help me out, and work out the details to meet up.
Thanks for helping out if you can,
Wade

Sorry, don't have any of that powder.

 

[The_Shadow]

BUMP! Still looking and watching for anyone who can help out! Please

 

[The_Shadow]

Last BUMP in case some may have missed this! Still looking and watching for anyone who can help out! Please

 

[Walrus]

You still looking for Autocomp sample?

 

[The_Shadow]

Yes I am, I have a small project to do with the sample! Do you have some you can spare?

 

[Walrus]

Taken to PM's.

 

[The_Shadow]

It was nice to meet with you this evening and many thanks for the powder sample, please extend this thanks to your friend as well!

 

[Walrus]

No worries. You're welcome!

 

[The_Shadow]

Well just to close this thread out my test using the AutoComp Sample as provided was a great success as tested...This confirmed my the pull-down of a commercial +P+ 9mm loading and it matched the velocity performance exactly. This was a great project for me to study

August 23, 2013
Underwood 115gr +P+ Speer Gold Dot Limited 4.75": 1469, 1473, 1473. Average = 1471.66 FPS/ 553 LBS
Todays Test Underwood 115gr +P+ Gold Dot EAA Limited 4.75" 1493 FPS/ 569 LBS

November 30, 2013
Underwood 124gr +P+ Nosler EAA Elite Limited 4.75" 1366, 1385, 1369, 1397, 1370, 1381, 1380. Average = 1387 FPS/ 530 LBS
Todays Test Underwood 124gr +P+ Nosler Eaa Limited 4.75" 1397 FPS/ 537 LBS

Once again many thanks for the powder sample!