Thermal hunting

[datboyhieu01]

Anyone locals do any thermal hunting for hogs or coyotes? I finally got my suppressor in dead air nomad L and my thermals came in today there’s a crazy good sale going on for InfiRay thermals

Was fooling around and checking out the new thermal…it is not mounted I was using my hands to check and see deff can’t wait to go out in the field with these

 

[AdvancedLaser]

Remember to check concentricity of the barrel to flash hider./brake to suppressor before you shoot it. Make sure it is all in line.

 

[twinin]

I hunt hogs with a suppressor and trijicon thermal hunter. I prefer black cool with white hot but it can be reversed

 

[datboyhieu01]

Remember to check concentricity of the barrel to flash hider./brake to suppressor before you shoot it. Make sure it is all in line.

Thank you for that tip but what if it’s a direct tread no need to worry right ?

 

[AdvancedLaser]

Thank you for that tip but what if it’s a direct tread no need to worry right ?

Id say you are wayyyy better off if its direct thread, but still check. I have seen off center barrel threads.

 

[datboyhieu01]

Id say you are wayyyy better off if its direct thread, but still check. I have seen off center barrel threads.

Thank you sir for the advice bc this is my first suppressor and I really wouldn’t to have any problems like that

 

[AdvancedLaser]

Thank you sir for the advice bc this is my first suppressor and I really wouldn’t to have any problems like that

Its really really unlikely, and of all the mounts I have checked for people, there was only one questionable one, and it was a 3d printed HuxWrx can. The OEM said it was within specs, and the owner shot it.

 

[twinin]

Who made the barrel or rifle you are putting the suppressor on?

 

[datboyhieu01]

Who made the barrel or rifle you are putting the suppressor on?

It’s going in a Daniel defense delta 308
And a tikka super varmint 7mm

Its really really unlikely, and of all the mounts I have checked for people, there was only one questionable one, and it was a 3d printed HuxWrx can. The OEM said it was within specs, and the owner shot it.

Since your pretty knowledgable I hear the deadair Keymo adaptation and their muzzle break have had problems do you know anything bout that?

 

[twinin]

They sell rods that you insert and check for concentricity. Some class 3 shops have them for you to use for a small fee

Very unlikely a DD r tikka barrel is not though

 

[AdvancedLaser]

It’s going in a Daniel defense delta 308
And a tikka super varmint 7mm



Since your pretty knowledgable I hear the deadair Keymo adaptation and their muzzle break have had problems do you know anything bout that?

I didnt hear they had problems. I havent seen any in my shop.

 

[AdvancedLaser]

They sell rods that you insert and check for concentricity. Some class 3 shops have them for you to use for a small fee

Very unlikely a DD r tikka barrel is not though

Yup, those are the rods I use to check barrels/brakes/suppressors.