SOLD
SOLD
SOLD
Palmetto State Armory AR15 for sale or trade
Just the Basics:
New in the Box, unfired PSA rifle featuring; 5.56 NATO chamber, 1/7 twist, 16” FN lightweight Machine Gun Barrel, mid-length gas system, M16 BCG, full Magpul furniture (STR and MOE). Magpul MBUS and (2) P-Mag magazines. All Magpul stuff in OD Green.
Cash $1650, Face to Face in Baton Rouge area.
Trades considered: Cowboy Action guns, Sig P229, Colt or S&W revolvers (modern or old), Benelli M2 Tactical, lever guns? other?
Full Specs: (from the PSA and Magpul sites):
Barrel: PSA Hammer forged light weight profile FN manufactured barrel. A proprietary blend of Hammer forged chrome molly vanadium made by FN that is referred to as "Machine Gun Steel" by virtue of its use in FN's M249 and M240 weapons. The hammer forging process work hardens the steel, making it more durable. In addition, the chrome process for the bore allows for a lining almost twice as thick as a standard M16 for enhanced durability. Chambered in 5.56 NATO, with a 1/7 twist, M4 barrel extension and a Mid-length gas system. A2 style profile barrel is Mil-spec phosphate coated, High Pressure tested and Magnetic Particle inspected. Barrel is finished off with an F-marked front sight post with sling swivel, bayonet lug and an A2 flash hider.
Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. Featuring machined T marks, and a mil-spec finish.
Bolt Carrier Group: M16 BCG Made of Mil-spec shot-peened Carpenter 158 steel. Gas key is secured with grade 8 fasteners and staked per mil-spec. Bolt carrier is parkerized outside, chrome lined inside.
Bolt: AR15 bolt made of 8620 Steel Fully Machined 8620
Steel Extractor, Black Extractor Insert, Hard Chrome Finish.
Charging Handle: T-6 Forged Mil-Spec Charging Handle
Fire Control Group: PSA standard.
Stock: STR Milspec The Magpul STR (Storage/Type Restricted) is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. A storage-capable version of the CTR®, the STR has improved cheek weld and two water resistant battery tubes on a compact, reinforced polymer A-frame design. A shielded operation lever and supplemental friction locking system prevent accidental operation and minimize excessive stock movement for enhanced weapon stability and accuracy.* The STR incorporates two integral sling loops, a reversible push-button QD sling mount, and a replaceable 0.30" rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Rear Sight: MBUS Gen 2 rear od green The new MBUS (Magpul Back-Up Sight) GEN 2 is a low-cost, color injection molded, folding back-up sight. The dual aperture MBUS Rear Sight is adjustable for windage and fits most 1913 Picatinny rail equipped weapons, but is specifically tailored to the AR15/M16 platform.
Hand Guard: Magpul MOE Hand Guard for AR15/M16 rifles with mid-length gas systems combines the light weight of a standard hand guard with modular flexibility. Designed with versatility in mind, slots at the two, six, and ten o'clock positions allow the attachment of optional Picatinny rail sections and other accessories for mounting tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly.
Hand Grip: Magpul MOE Grip provides Magpul quality, feel, and durability in an economical, drop-in upgrade for the standard AR15/M16/M4 pistol grip. The ergonomic, hand filling design combines aggressive texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional storage cores for gear stowage and includes a basic grip cap. All mounting hardware included.
Trigger Guard: Magpul MOE. The MOE Trigger Guard is an enhanced polymer drop in replacement for the AR15/M16 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The MOE Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard.
Magazines: (2) Olive Drab Green Magpul P-Mags.
Dark areas in pics are excess lube.
SOLD
SOLD
Palmetto State Armory AR15 for sale or trade
Just the Basics:
New in the Box, unfired PSA rifle featuring; 5.56 NATO chamber, 1/7 twist, 16” FN lightweight Machine Gun Barrel, mid-length gas system, M16 BCG, full Magpul furniture (STR and MOE). Magpul MBUS and (2) P-Mag magazines. All Magpul stuff in OD Green.
Cash $1650, Face to Face in Baton Rouge area.
Trades considered: Cowboy Action guns, Sig P229, Colt or S&W revolvers (modern or old), Benelli M2 Tactical, lever guns? other?
Full Specs: (from the PSA and Magpul sites):
Barrel: PSA Hammer forged light weight profile FN manufactured barrel. A proprietary blend of Hammer forged chrome molly vanadium made by FN that is referred to as "Machine Gun Steel" by virtue of its use in FN's M249 and M240 weapons. The hammer forging process work hardens the steel, making it more durable. In addition, the chrome process for the bore allows for a lining almost twice as thick as a standard M16 for enhanced durability. Chambered in 5.56 NATO, with a 1/7 twist, M4 barrel extension and a Mid-length gas system. A2 style profile barrel is Mil-spec phosphate coated, High Pressure tested and Magnetic Particle inspected. Barrel is finished off with an F-marked front sight post with sling swivel, bayonet lug and an A2 flash hider.
Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. Featuring machined T marks, and a mil-spec finish.
Bolt Carrier Group: M16 BCG Made of Mil-spec shot-peened Carpenter 158 steel. Gas key is secured with grade 8 fasteners and staked per mil-spec. Bolt carrier is parkerized outside, chrome lined inside.
Bolt: AR15 bolt made of 8620 Steel Fully Machined 8620
Steel Extractor, Black Extractor Insert, Hard Chrome Finish.
Charging Handle: T-6 Forged Mil-Spec Charging Handle
Fire Control Group: PSA standard.
Stock: STR Milspec The Magpul STR (Storage/Type Restricted) is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. A storage-capable version of the CTR®, the STR has improved cheek weld and two water resistant battery tubes on a compact, reinforced polymer A-frame design. A shielded operation lever and supplemental friction locking system prevent accidental operation and minimize excessive stock movement for enhanced weapon stability and accuracy.* The STR incorporates two integral sling loops, a reversible push-button QD sling mount, and a replaceable 0.30" rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Rear Sight: MBUS Gen 2 rear od green The new MBUS (Magpul Back-Up Sight) GEN 2 is a low-cost, color injection molded, folding back-up sight. The dual aperture MBUS Rear Sight is adjustable for windage and fits most 1913 Picatinny rail equipped weapons, but is specifically tailored to the AR15/M16 platform.
Hand Guard: Magpul MOE Hand Guard for AR15/M16 rifles with mid-length gas systems combines the light weight of a standard hand guard with modular flexibility. Designed with versatility in mind, slots at the two, six, and ten o'clock positions allow the attachment of optional Picatinny rail sections and other accessories for mounting tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly.
Hand Grip: Magpul MOE Grip provides Magpul quality, feel, and durability in an economical, drop-in upgrade for the standard AR15/M16/M4 pistol grip. The ergonomic, hand filling design combines aggressive texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional storage cores for gear stowage and includes a basic grip cap. All mounting hardware included.
Trigger Guard: Magpul MOE. The MOE Trigger Guard is an enhanced polymer drop in replacement for the AR15/M16 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The MOE Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard.
Magazines: (2) Olive Drab Green Magpul P-Mags.
Dark areas in pics are excess lube.
Last edited:
