O.K If you've seen my earlier posts, I've started reloading for a 7mm mag. I've been reloading pistol ammo for a while, but since 7mm mag is $25-55 a box of 20, I thought it best to start reloading that.
So I do all the prep, measure powder, seat the bullet and measure. Everything is fine. I go to the range load the ammo and click...bang. It's a long enough pause that when I fired the first round, I pulled the trigger click, started to pull my head from behind the scope and bang. Now we're talking about 1/3 to 1/2 a second. Now I fired about 20 rounds and the same thing happened on all. I got used to it and the rounds hit perfectly and are accurate. So what might be the problem.
Hornady 154gr SP
H414 = 58gr
CCI Large rifle primer
2975 fps
So I do all the prep, measure powder, seat the bullet and measure. Everything is fine. I go to the range load the ammo and click...bang. It's a long enough pause that when I fired the first round, I pulled the trigger click, started to pull my head from behind the scope and bang. Now we're talking about 1/3 to 1/2 a second. Now I fired about 20 rounds and the same thing happened on all. I got used to it and the rounds hit perfectly and are accurate. So what might be the problem.
Hornady 154gr SP
H414 = 58gr
CCI Large rifle primer
2975 fps