Just a couple of tips that I use for myself when loading for the Garand:
I concur with the posts above that with any auto-loading rifle, like the Garand, brass should be FL sized every time. Further, after FL sizing, brass length should be measured each time, and trimmed, if necessary.
I also...
This sad and despicable anti-officer behavior on campus won't change until those in charge change. This change can be brought about by cutting the dollars.
I was on the rifle line when this began to unfold. First sign of a problem was when 2 RO's ran toward the clay bird blind. The gentleman collapsed behind the blind so he was not visible to anyone on the line. An ambulance and several SO's arrived. I feared the worse when seeing that when the...
I hand load for my Rem 700 in 30-06. It's extremely accurate, and accuracy is improved with the cartridge overall length in the 3.30" area. MOA accuracy. or better, at 100 yards.............
First off, make sure the cases are being full length sized and not just partially sized. Run up the ram on the sizing dir all the way up. Screw in the sizing die until it contacts the shellholder in the ram and lock in the die. It's now set to size the entire case body.
Now, it's also...
The flame is caused by the Win 296 powder. It is so effective as a magnum powder due to its slightly slower burn rate. The higher velocities produced by this powder result from its continuous burn all the way down the barrel. Thus the flame at the end - the powder is still burning.
I've...
I've only been able to find 700-X this past year. So, I picked up 20 pounds while it was available. That was several months ago.......haven't seen it since.....
To make sure that when my 5-0-5 scale reads 20 grains, for example, that it is actually 20 grains, I use Lyman check weights at the beginning if each reloading session.
The checkweights affirm the accuracy of the scale. I typically zero my scale using check weights for the load I'm using...
I, for one, don't blame anyone for buying in quantity. Last week was 223 greentips.
If anybody thinks King Hussein is finished degrading our 2d amendment rights, then don't buy any more supplies. Then, there will be more for the rest of us.
There's more 2d amendment attacks to come in...
Just my luck. I'm a care-giver when not working, so it is extremely difficult for me to get out. I can't make the show. But very good to know....
And those darn hazmat fees if I buy and have shipped.....
Bayou52